LC6090 RF AMD CO2 LASER CUTTING & ENGRAVING MACHINE
Equipped with RF tube and CO2 laser tube, More Cost-Effective
30W RF Laser Tube For Engraving, Higher precision
Smaller laser spot size, it can engrave ultra-fine details .Longer life ,it can be used for about 10-12 years.The engraving effect is non-scorched and non-black.
Higher power CO2 Laser Tube for cutting, More cost-effective
Optional 40-100W CO2 laser tube, capable of cutting thicker materials，cheaper than the RF tube.Using Yongli laser tube, its photoelectric conversion efficiency is high, the laser output power density is high, the beam is concentrated, and the spot is uniform. The engraving/cutting speed is fast and the engraving line is deep and narrow with high resolution and clear characters. The work life of laser tube is long and the fault rate is low.
Auto Focus
Without manually adjust focal length; Improve the efficiency and precision of laser cutting machine.
Hiwin Precise Linear Guide
Equipped with Taiwan Hiwin rail guide, with features of high positioning accuracy, strong load bearing and good dynamic performance.
High Efficiency Particle Air Filter
Environmental protection without pollution.
Three-stage filtration.
The first is bag filtration of large particles.
The second IS HEPA filtration of particles larger than that of 0.03um.
The third is activated carbon adsorbs of smoke and dust odour.
Double Work Platform
Can install double work platform, both blade work table and honeycomb work table, can use to do both cutting and engraving.
Automatic Up And Down Platform
This machine is designed specially for thick material with its automatic up and down platform, customers can engrave on different thickness of materials.
Machine Advantage
Japan OMRON
Electronic Component
WIFI Control
High efficiency-q PC can control several different machines.
Convenient-The engineers can remotely control the computer
and the machine.
U.S II-VI Optical Lenses
Use high strength gold-plated lenses and aspherical focusing
lenses from U.S II-VI with features of high focus, high
transmittance.
Application Industry
wood, bamboo, jade, marble, organic glass, crystal, plastic, garments, paper, leather, rubber, ceramic, glass and other nonmetal materials.
Technical Parameters
| Laser – Type | Sealed CO2 laser tube |
| Laser power | 60W 80W(optional) |
| Cutting Area | 900mm x 600mm |
| Whole Machine Size | 1360* 1010* 1070mm |
| Cutting Speed | ±0.05mm |
| Resetting Positioning Accuracy | AC 110 -220V±10%, 50-60Hz |
| Working Voltage | <1000W |
| Gross Power | 5-95% |
| Operating Temperature | 0-45℃ |
| Operating Humidity | Free of condensed water |
