The B10 ELECTRA is a portable bevelling and deburring system designed for workpieces, internal and external radiuses and holes. It provides a bevel width of up to 10 mm on materials below 400 MPa and up to 5 mm on materials above 400 MPa. Replaceable milling heads provide bevel angles of 30°, 37.5°, 45°, 50° and 60°, while edge-rounding heads are available for R2.5, R3.5 and R4 mm radiuses. With a 1,700 W motor, electronic speed control from 2,700 to 8,500 rpm and a weight of 6 kg, the B10 ELECTRA is designed for bevelling, deburring and welding preparation.
The B10 ELECTRA is a professional hand-held bevelling and deburring system designed for machining workpieces, internal and external radiuses and holes. N.KO specifically identifies the machine for producing bevels and preparing edges for welding.
The machine provides a bevel width of 0–10 mm on materials below 400 MPa and 0–5 mm on materials above 400 MPa. The bevel angle is determined by replaceable milling heads, with standard options of 30°, 37.5°, 45°, 50° and 60°. Other angles are available on request.
In addition to V-beveling, the B10 ELECTRA supports facing and radius machining. Edge-rounding heads are available for radiuses of R2.5 mm, R3.5 mm and R4 mm. N.KO also specifies the edge-rounding function for preparation before surface treatment.
The B10 ELECTRA is powered by a 1,700 W motor and provides electronic speed control from 2,700 to 8,500 rpm. Feed is manual.
A built-in scale for accurate bevel-size adjustment allows the required bevel size to be set directly on the machine. The B10 ELECTRA is suitable for bevelling and deburring steel, aluminium and other materials.
The machine weighs 6 kg and is designed as powerful hand-held equipment. N.KO also describes its construction as durable and stable.
The B10 ELECTRA can be combined with the optional B-DOCK, which enables the machine to be used in a stationary configuration. The B-DOCK is intended for smaller workpieces that may be difficult or impossible to clamp and bevel using the standard hand-held method.
The B10 ELECTRA combines hand-held operation with several edge-machining functions. It supports V-beveling, facing and radius machining and can be used on workpieces, internal and external radiuses and holes.
Replaceable milling heads allow different bevel angles to be selected. Standard heads are available for 30°, 37.5°, 45°, 50° and 60°, while other angles can be supplied on request.
The machine provides electronic speed control from 2,700 to 8,500 rpm and is powered by a 1,700 W motor. Thermal overload protection is also specified in the official technical data.
The edge-rounding function provides R2.5, R3.5 and R4 mm radiuses and is intended for preparation before surface treatment.
The integrated bevel-size scale allows accurate adjustment of the required bevel size. The optional B-DOCK extends the system to stationary use and is designed for smaller workpieces that are difficult to process using the standard hand-held method.
The B10 ELECTRA is suitable for users who need portable bevelling, deburring and edge rounding in one hand-held system. It supports V-beveling, facing and radius machining and can be used on workpieces, internal and external radiuses and holes.
Its 1,700 W motor, electronic speed control from 2,700 to 8,500 rpm and replaceable milling heads provide several machining configurations within the same machine. The available edge-rounding heads add R2.5, R3.5 and R4 mm radius preparation.
With a weight of 6 kg and the option to combine the machine with the B-DOCK for stationary use, the B10 ELECTRA provides portable operation with multiple documented edge-preparation functions.
B10 ELECTRA
Fill out the form below, and we will be in touch shortly.
