UZ29 SPEEDER

The UZ29 SPEEDER is one of the largest and most powerful rotary-cutting automatic-feed beveling machines in the N.KO range. It is designed for heavy-duty weld preparation where larger bevel widths, stable feed and controlled machining are required on both standard and stainless steel. beveler.eu

The machine produces bevels up to 29 mm wide and can achieve a bevel width of 18 mm in the first cut at its standard feed rate of 1.8 m/min. It processes materials from 6 to 60 mm thick and is suitable for conventional steel up to 700 MPa, stainless steel, brass, copper and aluminium. beveler.eu

Bevel angles are set using replaceable angle kits, with available angles of 22.5°, 30°, 37.5°, 45° and 50°. This gives the machine flexibility for different weld geometries while maintaining a robust mechanical setup suited to repeated industrial use. beveler.eu

The integrated automatic feed system moves the machine along larger workpieces at 1.8 m/min. For smaller parts, material can be inserted directly into the machine, allowing the UZ29 SPEEDER to be used in both mobile and stationary configurations. beveler.eu

A major feature of the UZ29 SPEEDER is its standard 3D manipulator. The rotary mechanism allows the complete machining unit to be turned upside down, making it possible to produce double-sided X and K bevels without turning the workpiece itself. The adaptive 3D arrangement also compensates for uneven floors and deformation along the material. beveler.eu

The machine is powered by a 1,500 W three-phase motor and uses a worm-gear drive system designed to operate without oil changes. N.KO also highlights its very quiet operation, making it suitable for continuous workshop use without significantly increasing workplace noise. beveler.eu

Key points

• Heavy-duty automatic-feed beveling system for demanding weld preparation.
• Maximum bevel width of 29 mm.
• Bevel width up to 18 mm in the first cut at 1.8 m/min feed speed.
• Material thickness range of 6–60 mm.
• Automatic feed rate of 1.8 m/min.
• Replaceable angle kits for 22.5°, 30°, 37.5°, 45° and 50°.
• Supports V-bevels and double-sided X / K bevels.
• Suitable for conventional steel up to 700 MPa, stainless steel, brass, copper and aluminium.
• Can operate in both stationary and mobile configurations.
• Standard 3D manipulator allows 180° rotation of the machining unit.
• Adaptive system compensates for uneven floors and material deformation.
• Powered by a 1,500 W three-phase motor.
• Quiet drive and one-man operation.

Technical advantages

The UZ29 SPEEDER combines high bevel capacity, automatic feed and adaptive 3D handling in a machine designed for larger and more demanding workpieces. Its 29 mm bevel capacity and 6–60 mm material range make it suitable for heavier weld-preparation jobs than smaller automatic-feed systems. beveler.eu

The 1.8 m/min automatic feed helps maintain stable movement along long plate edges, supporting consistent bevel geometry and reducing operator effort. Smaller components can also be fed directly through the machine, increasing its usefulness across different production scenarios. beveler.eu

The standard 3D manipulator is one of the system’s most important technical advantages. It allows the complete machining unit to rotate through 180°, enabling X and K bevels without turning heavy plates. It also adapts to uneven floors and deformation in the workpiece, helping maintain stable contact during machining. beveler.eu

The worm-gear drive does not require oil changes, while the machine’s quiet drive helps reduce unnecessary workplace noise. Combined with the 1,500 W motor and replaceable angle kits, these features make the UZ29 SPEEDER suitable for regular industrial production with relatively straightforward maintenance. beveler.eu

Applications

• Weld preparation on medium and large steel plates.
• V-bevel preparation.
• Double-sided X and K bevel preparation.
• Processing of conventional steel up to 700 MPa.
• Beveling of stainless steel, aluminium, brass and copper.
• Long-edge preparation using automatic machine feed.
• Heavy fabrication and structural steel applications.
• Batch production requiring repeatable bevel geometry.
• Applications where reducing plate handling improves safety and productivity.
• Stationary processing of smaller workpieces.
• Mobile beveling of large plates and fabricated components.

Why choose the UZ29 SPEEDER

The UZ29 SPEEDER is a strong choice for fabrication companies that need greater bevel capacity, automatic feed and double-sided processing in a heavy-duty machine. Its 29 mm maximum bevel width, broad material thickness range and compatibility with multiple metals make it suitable for demanding industrial edge preparation. beveler.eu

The standard 3D manipulator gives the machine a significant practical advantage by allowing the machining unit itself to rotate for X and K bevels. This reduces the need to turn heavy workpieces and can simplify production considerably when large plates are involved.

For users who need a robust, quiet and adaptable beveling system for both mobile and stationary work, the UZ29 SPEEDER offers a strong combination of power, productivity, flexibility and controlled bevel geometry.